All About Scuba diving

Scuba diving ("SCUBA" originally being an acronym for self contained underwater breathing apparatus, now widely considered a word in its own right) is a form of underwater diving in which a diver uses a scuba set to breathe underwater.

Unlike early diving, which relied exclusively on air pumped from the surface, scuba divers carry their own source of breathing gas (usually compressed air), allowing them greater freedom than with an air line. Both surface supplied and scuba diving allow divers to stay underwater significantly longer than with breath-holding techniques as used in snorkelling and free-diving. Depending on the purpose of the dive, a diver usually moves underwater by swimfins attached to the feet, but external propulsion can come from an underwater vehicle, or a sled pulled from the surface.

History

Original Aqualung scuba set.
1: Air Hose, 2: Mouthpiece, 3: Regulator, 4: Harness, 5: Back plate, 6: Tank

The first commercially successful scuba sets were the Aqualung open-circuit units developed by Emile Gagnan and Jacques-Yves Cousteau, in which compressed gas (usually air) is inhaled from a tank and then exhaled into the water adjacent to the tank. However, the scuba regulators of today trace their origins to Australia, where Ted Eldred developed the first mouth piece regulator, known as the Porpoise. This regulator was developed because patents protected the Aqualung's double hose design. It separated the cylinder from the demand valve giving the diver air at the same pressure surrounding his mouth, not surrounding the tank.

The open circuit systems were developed after Cousteau had a number of incidents of oxygen toxicity using a rebreather system, in which exhaled air is reprocessed to remove carbon dioxide. Modern versions of rebreather systems (both semi-closed circuit and closed circuit) are still available today, and form the second main type of scuba unit, most commonly used for technical diving, such as deep diving.

Types of diving

Professional diver performing underwater welding

Scuba diving may be performed for a number of reasons, both personal and professional. Most people begin through recreational diving, which is performed purely for enjoyment and has a number of distinct technical disciplines to increase interest underwater, such as cave diving, wreck diving, ice diving and deep diving.

Divers may be employed professionally to perform tasks underwater. Most of these commercial divers are employed to perform tasks related to the running of a business involving deep water, including civil engineering tasks such as in oil exploration, underwater welding or offshore construction. Commercial divers may also be employed to perform tasks specifically related to marine activities, such as naval diving, including the repair and inspection of boats and ships, salvage of wrecks or underwater fishing, like spear fishing.

Other specialist areas of diving include military diving, with a long history of military frogmen in various roles. They can perform roles including direct combat, infiltration behind enemy lines, placing mines or using a manned torpedo, bomb disposal or engineering operations. In civilian operations, many police forces operate police diving teams to perform search and recovery or search and rescue operations and to assist with the detection of crime which may involve bodies of water. In some cases diver rescue teams may also be part of a fire department or lifeguard unit.

Lastly, there are professional divers involved with the water itself, such as underwater photography or underwater filming divers, who set out to document the underwater world, or scientific diving, including marine biology and underwater archaeology.

Breathing underwater

Scuba diver on reef

Water normally contains the dissolved oxygen from which fish and other aquatic animals extract all their required oxygen as the water flows past their gills. Humans lack gills and do not otherwise have the capacity to breathe underwater unaided by external devices. Although the feasibility of filling and artificially ventilating the lungs with a dedicated liquid (liquid breathing) has been established for some time, the size and complexity of the equipment allows only for medical applications with current technology.

Early diving experimenters quickly discovered it is not enough simply to supply air to breathe comfortably underwater. As one descends, in addition to the normal atmospheric pressure, water exerts increasing pressure on the chest and lungs—approximately 1 bar (14.7 pounds per square inch) for every 33 feet (10 m) of depth—so the pressure of the inhaled breath must almost exactly counter the surrounding or ambient pressure to inflate the lungs. It generally becomes difficult to breathe through a tube past three feet under the water.By always providing the breathing gas at ambient pressure, modern demand valve regulators ensure the diver can inhale and exhale naturally and virtually effortlessly, regardless of depth.Because the diver's nose and eyes are covered by a diving mask; the diver cannot breathe in through the nose, except when wearing a full face diving mask. However, inhaling from a regulator's mouthpiece becomes second nature very quickly.

Open-circuit regulator

Aqualung Legacy regulator

Gekko dive computer with attached pressure gauge and compass

The most commonly used scuba set today is the "single-hose" open circuit 2-stage diving regulator, coupled to a single pressurized gas cylinder, with the first stage on the cylinder and the second stage at the mouthpiece.This arrangement differs from Emile Gagnan's and Jacques Cousteau's original 1942 "twin-hose" design, known as the Aqua-lung, in which the cylinder's pressure was reduced to ambient pressure in one or two or three stages which were all on the cylinder. The "single-hose" system has significant advantages over the original system.

Aqualung 1st stage

Suunto pressure gauge close up

In the "single-hose" two-stage design, the first stage regulator reduces the cylinder pressure of about 200 bar (3000 psi) to an intermediate level of about 10 bar (145 psi) The second stage demand valve regulator, connected via a low pressure hose to the first stage, delivers the breathing gas at the correct ambient pressure to the diver's mouth and lungs. The diver's exhaled gases are exhausted directly to the environment as waste. The first stage typically has at least one outlet delivering breathing gas at unreduced tank pressure. This is connected to the diver's pressure gauge or computer, in order to show how much breathing gas remains.

Rebreather

An Inspiration electronic fully closed circuit rebreather

Less common are closed (CCR) and semi-closed (SCR) rebreathers,which unlike open-circuit sets that vent off all exhaled gases, reprocess each exhaled breath for re-use by removing the carbon dioxide buildup and replacing the oxygen used by the diver.Rebreathers release few or no